Use a magnetic wand to create your own designs with activated magnetic particles!
We recommend using our Japanese magnets (sold separately).
LED: 30 s / UV: 60 s
1. PREPARATION:
Carefully prepare the nail by removing dead skin and cuticles. Lightly buff the nail with a buffer block to remove impurities and excess shine. Cleanse the nail with alcohol to prepare it for gel application.
2. BASE:
Apply a KOKOIST base gel to the natural nail and cure under a UV and/or LED lamp. OPTIONAL: Apply two coats of base, curing between coats for better adhesion.
3. APPLICATION:
Using an applicator brush, apply the KOKOIST magnetic gel without curing. Use the 5D magnet to activate the magnetic particles as desired. Once you like your design, cure under a UV and/or LED lamp.
OPTIONAL: Apply a second coat of magnetic gel and repeat step 3 to create more depth and relief.
4. FINISH:
Apply the KOKOIST Top Coat Gel and cure under a UV and/or LED lamp.
NOTE: With the exception of transparent and glitter colors, KOKOIST colored gels do not require mixing before use.
Too thick a layer of gel can result in an uneven nail surface or the formation of air bubbles, preventing optimal curing.
Store away from direct light and at room temperature after each use. We recommend using a powerful UV/LED lamp for complete curing, as a too-thick gel may peel off.
Adhere to the recommended curing times for each step. Avoid contact with skin. Applying gel to the cuticles or around the eponychium can cause lifting. Uncured gel left on the skin can cause allergic reactions.
Discontinue use immediately if itching, redness, or swelling of the skin occurs and consult a doctor.
