Use a magnetic wand to create your own designs with activated magnetic particles!
We recommend using our Japanese magnets (sold separately).
LED: 30 s / UV: 60 s
1. PREPARATION:
Carefully prepare the nail by removing dead skin and cuticles. Lightly buff the nail with a buffer block to remove impurities and excess shine. Clean the nail with alcohol to prepare it for gel application.
2. BASE COAT:
Apply a KOKOIST gel base coat to the natural nail and cure under a UV and/or LED lamp. OPTIONAL: Apply two layers of base coat, curing between each for better hold.
3. APPLICATION:
Using an applicator brush, apply the KOKOIST magnetic gel without curing. Use the 5D magnet to activate the magnetic particles as desired. Once your design is to your liking, cure under a UV and/or LED lamp.
OPTIONAL: Apply a second layer of magnetic gel and repeat step 3 to create more depth and dimension.
4. FINISH:
Apply KOKOIST Top Coat Gel and cure under a UV and/or LED lamp.
NOTE: With the exception of transparent and glitter colors, KOKOIST colored gels do not require mixing before use.
A layer of gel that is too thick can result in an uneven nail surface or the formation of air bubbles, preventing optimal curing.
Store away from direct light and at room temperature after each use. We recommend using a powerful UV/LED lamp for complete curing, as a gel that is too thick may peel off.
Follow the recommended curing times for each step. Avoid contact with skin. Applying gel to the cuticles or around the eponychium can cause lifting. Uncured gel left on the skin can cause allergic reactions.
Immediately discontinue use if itching, redness, or swelling of the skin occurs and consult a doctor.
